Loading...
News Article

Rohm TP-PFC controller enables MHz GaN switching

News
Enables high efficiency and low standby power in compact AC-DC power supplies

Rohm has developed the BM85060FV, a totem-pole power factor correction (TP-PFC) controller IC for high-efficiency, compact AC-DC power supplies. A key feature is its ability to operate in the MHz band, supporting high-frequency switching with GaN HEMTs.

As consumer electronics and industrial equipment become more sophisticated, they require more power while also demanding smaller size and higher efficiency. Stricter energy regulations further drive the need for both improved operating efficiency and lower no-load power consumption. GaN HEMTs are gaining adoption due to their high-frequency switching performance.

Additionally, when paired with a bridgeless TP-PFC controller such as BM85060FV, system designers can significantly reduce power loss and solution footprint, enabling compact, high-efficiency power supplies. However, conventional MCU-based TP-PFC control has posed challenges in terms of power consumption, circuit size, cost, and achieving high-frequency switching with GaN HEMTs.

This new product enables a system-level efficiency of 99 percent in 300 to 500 W-class AC-DC power supplies. The high switching frequency allows for the miniaturization of peripheral components, resulting in a smaller solution footprint.

No-load current consumption of 150 µA - a 70 percent reduction compared to standard products - makes it easier to reduce system standby power consumption and contributes to the development of power supply systems that meet the energy-saving requirements of DOE Level 7 and CoC Tier 2.

Furthermore, the device incorporates various protection functions required for AC-DC power supplies, including a lightning surge protection circuit, which helps reduce the design burden and improve system reliability.

Sales of the new product began in November 2026. It is available for purchase through online distributors. Additionally, a 330W output TP-PFC evaluation board featuring the chip is available to support the development of high-efficiency AC-DC power supplies using GaN HEMTs.


Logo
x